Elecraft K60XV Manual Errata User Manual download pdf

Page 1 of 1

K60XV MANUAL ERRATA

Rev. B-3, December 15, 2013

PLEASE MAKE THE FOLLOWING CHANGES TO THE MANUAL BEFORE

PROCEDING TO ENSURE THAT THE K60XV FUNCTIONS CORRECTLY

1. Page 3, Parts Inventory, Ref D1-D2: Change the description to read “Diode 1N4148”. Change the part

number to “E560002”.’

Page 3, Parts Inventory, Ref RF-D19, RF-D20: Add MV209 to the description so it reads “Diode,

varactor, MV2109 or MV209”

3. Page 4, add the following step after the second checkbox step:

Install diodes D1 and D2 (1N4148). Orient the banded end (cathode) of each diode as indicated

by its component outline.

4. Page 4: Last checkbox step, add: Do not trim the relay pins.

5. Page 5: Delete the note at the bottom of the page. It no longer applies.

6. Page 6: Delete the first, second and third checkbox steps (the SMT1B board is no longer used).

7. Page 8, last step: Change the second line to read “(MV2109 or MV209)”.

8. Page 20: On the schematic diagram, update the upper right corner with the changes shown below

around D1 and D1:

Page 1 of 1 K60XV MANUAL ERRATA Rev. B-3, December 15, 2013 PLEASE MAKE THE FOLLOWING CHANGES TO THE MANUAL BEFORE PROCEDING TO ENSURE THAT THE K60XV

No comments

Elecraft K60XV Manual Errata User Manual